NEC NC1700L Installation Manual page 101

Baudrate
To select the transmission speed (bps) for your projector (SYSTEM) and a PC when they are connected by a commercially
available RS-232C straight cable. Select one from 4800, 9600, 19200 and 38400. Select the transfer speed corresponding to
the speed of the connected devices.
Date/Time
Use this to set the date and time on the projector.
The internal clock in the projector uses coordinated universal time (UTC). This sets the time difference between the standard
time in your region and UTC.
TIP
If you are using DCC, you can set the date and time from your computer. Refer to "Digital Cinema Communicator
for S2 Installation Manual" for details.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
← Displays the currently setting with asterisk (*).
← Sets the time difference between the standard time in your region and UTC.
Press the ENTER button to check the time difference between the built-in projector clock
and UTC.
LCD Menu
101