NEC NC1700L Installation Manual page 100

LCD Menu
Lens Type
Sets the type of lens (supports or does not support the lens memory function) attached to the projector. This menu item is
available only when you are logged into the projector with Advanced User or higher privileges.
Without Sensor
With Sensor
Lens Calibrate
Performs calibration on lenses that support the lens memory function. Once you have attached a lens that supports the lens
memory function, always execute calibration. This menu item is available only when the projector power is turned on and you
are logged into the projector with Advanced User or higher privileges.
This items cannot be used if Lens Type is set to "Without Sensor".
NOTE
Lens Center
To move the lens shift to the center position. The center position may slightly shift depending upon mounting conditions of the
lens. This menu item is available only when the projector power is turned on and you are logged into the projector with
Advanced User or higher privileges.
100
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Selected when using a lens unit that does not support the lens memory function (default value).
Selected when using a lens unit that supports the lens memory function.
← Press the ENTER button to execute calibration.
← Press the ENTER button to execute moving.