Ac Power Cords; Specifications - Alcatel-Lucent OmniSwitch 6250-M Hardware User's Manual

AC Power Cords

Since the power cord is the switch's only disconnect device, it should be plugged into an easily accessible
outlet. In the event that your power cord is lost or damaged, refer to the specifications below.

Specifications

The power cord included with this product contains three (3) insulated #18AWG stranded copper wires
and is rated between 85-265 VAC (region dependent), 10 amps with a nominal length of 2 meters. The
female end terminates in an IEC-60320-C15 attachment plug and the male end termination varies depen-
dent upon region, as listed below.
European cords must be Harmonized (HAR) type. Refer to the information below for power plug types by
region:
Power Cord Types
North America
United Kingdom / Ireland
Europe
Japan
Australia
India
Italy
Switzerland / Liechtenstein
Denmark / Greenland
Argentina
page 2-28
Preliminary
9/28/09
User Side Connectors
NEMA 5-15-P
BS 1363 UK
CEE 7/7
JIS 8303
AS 3112
BS 546
CIE 23-16
SEV 1011
SRAF 1962 / DB 16/87
A-10
Supplied 6250 Power Cord Specifications
OmniSwitch 6250 Series Hardware Users Guide
IEC-60320-C15
September 2009