Configure Nrs For Multi Site Mobility Network - Nortel CS 1000 User Manual

178 System configuration
Procedure 87
Importing subscriptions on remote systems
Step
1
2
3
4
5
Configure NRS for multi site mobility network
Procedure 88
Configuring NRS for multi site mobility network
Step
1
2
3
4
5
6
7
8
Copyright © 2008-2009 Nortel Networks
.
Action
Open localhost/cds in you Internet Browser (on DAP controller
PC).
The DAP manager IP DECT page appears.
In the navigation menu, click Pack Up & Go.
Click Import.
Choose the appropriate file in the folder that stores files with
subscriptions
Click OK.
Action
Log in to Element Manger, select Dialing & Numbering plans >
Network Routing Service and enter the TLAN address of the
Signaling Server. Click Next.
Select Configuration from the tool bar at the top of the page. A
dialog box indicating the status of Active and Standby database
is displayed. Click OK.
Click set standby DB view.
Select Routing Entries from the menu list on the left.
Click Look Up and the Look up path for gateway endpoints
page is displayed.
Select the SIP endpoint for DAP on the current system, for
example DAP1, and the ID of the selected endpoint is entered in
the Gateway Endpoint text box.
Click Show to see all the entries for this endpoint.
This field is empty if there are no entries.
Click Add.
If you configured UDP, select Private level 1 regional (UDP
location code) for DN type, enter the location code (LOC)
and question marks (?) equal to the number of digits of DN
subscribed to DAP, for example 442????, for DN Prefix and 1
for Route cost and click Save.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
--End--