Edit A Subscription Rpn - Nortel CS 1000 User Manual

188 System administration
4
5
6
7
8

Edit a subscription RPN

If it is necessary to change the DAP RPN to which the handset is
subscribed, follow the steps in the next procedure.
Copyright © 2008-2009 Nortel Networks
.
The handset can be subscribed to the extension number only if
the status of the handset is free.
If the number you require does not appear, select another page.
The page number is displayed in the top and bottom rows of the
subscriptions table.
Click Enable.
The status of the configuring subscription record changes from
"Free" to "Enabled" and the Personal Identification Number (PIN)
appears. A PIN is generated by the DAP manager on each
subscribe operation and is only displayed while the subscription
status is enabled.
You can enable up to ten extension numbers for subscription at
the same time.
Using the handset you are subscribing, Access the System
configuration menu, and choose New.
See the User Guide for the handset for more information
about accessing this menu, and other handset configuration
information.
If the handset requests PARK code, enter the PARK code.
You can find the PARK code on the left at the bottom of the
Subscriptions page. A PARK code is required only if there
are overlapping DECT systems in your location; if only one
DECT system is available in your location, a PARK code is not
required.
Enter the displayed PIN code.
If you do not enter the PIN within 16 minutes, the subscription
mode is terminated for that specific extension number, and you
must begin the subscription process from the beginning.
Enter the name of your SIP DECT system and the DN.
You can find the name of the system and the DN on the handset
screen. The status of the configuring subscription record
changes from "Enabled" to "Subscribed".
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
--End--