Genie S-40 Operator's Manual page 48

Operator's Manual
Transport and Lifting Instructions
Observe and Obey:

Only qualified riggers should rig and lift the
machine.

Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
Turntable
Lifting
Point (1)
Y Axis
46
Lifting Instructions
Fully lower and retract the boom. Move the jib
boom parallel with the ground. Remove all loose
items on the machine.
Use the turntable rotation lock to secure the
turntable.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two lifting points
on the chassis and one on the turntable.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of gravity
S-40
S-45
Chassis
CG
Lifting
Points (2)
X Axis
S-40 • S-45
Eight Edition • First Printing
X Axis Y Axis
1.34 m 98 cm
1.18 m 95 cm
Part No. 1259838