Genie S-40 Operator's Manual page 15

Eight Edition • First Printing
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the maximum uphill, downhill or side slope rating of
the machine. Slope rating applies only to machines
in the stowed position.
Maximum slope rating, stowed position, 2WD
Platform downhill
Platform uphill
Side slope
Maximum slope rating, stowed position, 4WD
Platform downhill
Platform uphill
Side slope
Note: Slope rating is subject to ground conditions
and adequate traction. See Driving on a Slope in
the Operating Instructions section.
Part No. 1259838
Fall Hazards
30% (17°)
15% (9°)
25% (14°)
40% (22°)
40% (22°)
25% (14°)
Keep the platform floor clear of debris.
Lower the platform entry mid-rail or close the entry
gate before operating.
Do not enter or exit the platform unless the
machine is in the stowed position and the platform
is at ground level.
S-40 • S-45
Operator's Manual
Work Area Safety
Occupants must wear a
safety belt or harness in
accordance with
governmental regulations.
Attach the lanyard to the
anchor provided in the
platform.
Do not sit, stand or climb
on the platform guard
rails. Maintain a firm
footing on the platform
floor at all times.
Do not climb down from
the platform when raised.
13