Genie S-40 Operator's Manual page 26

Operator's Manual
Controls
Platform Control Panel
1 Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
2 Platform level switch
Move the platform level
switch up and the level of
the platform will raise.
Move the platform level
switch down and the level
of the platform will lower.
3 Platform rotate switch
Move the platform
rotate switch to the right
and the platform will
rotate to the right. Move
the platform rotate
switch to the left and
the platform will rotate
to the left.
4 Jib boom up/down switch
Move the jib boom switch
up and the jib boom will
raise. Move the jib boom
switch down and the jib
boom will lower.
5 Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
24
6 Drive speed select switch
Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.
7 Diesel Models: Glow plug switch
Move the glow plug switch to either side and
hold for 3 to 5 seconds.
8 Engine start switch
Move the engine start switch to either side to
start the engine.
9 Engine idle (rpm) select switch
Move the engine idle select switch to the turtle
position for foot switch activated low idle.
Move the engine idle select switch to the rabbit
position for foot switch activated high idle.
10 Gasoline/LPG models: Fuel select switch
Move the fuel select switch to the gasoline
position to select gasoline. Move the fuel
select switch to the LPG position to select
LPG.
11 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
S-40 • S-45
Eight Edition • First Printing
Part No. 1259838