Genie S-40 Operator's Manual page 23

Eight Edition • First Printing
5 Engine start switch
Move the engine start switch to either side to
start the engine.
6 Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
7 Not used
8 Boom up/down switch
Move the boom up/down switch up and the
boom will raise. Move the boom up/down
switch down and the boom will lower.
9 Function enable button
Press and hold the function enable button to
enable the functions on the ground control
panel to operate.
10 Circuit breakers
11 Key switch for off/ground/platform selection
Turn the key switch to the off position and the
machine will be off. Turn the key switch to the
ground position and the ground controls will
operate. Turn the key switch to the platform
position and the platform controls will operate.
12 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
Part No. 1259838
13 Platform overload indicator lightLight flashing
indicates the platform is overloaded. The
engine will stop and no functions will operate.
Remove weight until the light goes off and then
restart the engine.
14 Jib boom up/down switch
Move the jib boom switch up and the jib boom
will raise. Move the jib boom switch down and
the jib boom will lower.
15 Platform level switch
Move the platform level switch up and the level
of the platform will raise. Move the platform
level switch down and the level of the platform
will lower.
16 Boom extend/retract switch
Move the boom extend/retract switch to the
right and the boom will extend. Move the boom
extend/retract switch to the left and the boom
will retract.
17 Platform rotate switch
Move the platform rotate switch to the right
and the platform will rotate to the right. Move
the platform rotate switch to the left and the
platform will rotate to the left.
18 Turntable rotate switch
Move the turntable rotate switch to the right
and the turntable will rotate to the right. Move
the turntable rotate switch to the left and the
turntable will rotate to the left.
19 Not used
20 Hour meter
The hour meter displays the number of hours
the machine has operated.
S-40 • S-45
Operator's Manual
Controls
21