Genie S-40 Operator's Manual page 27

Eight Edition • First Printing
12 Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.
13 Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
14 Machine not level indicator light
Light is on when the platform is raised and the
machine is on a severe slope. The drive
function in one or both directions will not
operate.
Part No. 1259838
15 Drive enable indicator light
Light on indicates that the boom has moved
just past either non-steer wheel and drive
function has been interrupted.
16 Drive enable switch
To drive when the drive enable light is on, hold
the drive enable switch to either side and
slowly move the drive control handle off center.
Be aware that the machine may move in the
opposite direction that the drive and steer
controls are moved.
17 Boom extend/retract switch
Move the boom
extend/retract switch to the
right and the boom will
extend. Move the boom
extend/retract switch to the
left and the boom will
retract.
18 Used for optional equipment
19 Dual axis proportional control handle for boom
up/down and turntable rotate left/right
functions
Move the control handle up
and the boom will raise.
Move the control handle
down and the boom will
lower.
Move the control handle to
the right and the turntable
will rotate to the right. Move
the control handle to the left
and the turntable will rotate
to the left.
S-40 • S-45
Operator's Manual
Controls
25