Error And Status Indicate On The Control Panel - Ricoh BBP-PRSP213NW1 Manual

Error and Status Indicate on the Control
P
Panel
The LED on the operation panel indicates the machine status, including any errors.
LED
Toner/ Alarm
Paper
End
- -
- -
Flashing -
On -
- Flashing
- On
opal-p2_mf2_com_user_guide_00142157_eng.xml
Power
Status
On The power is on.
Flashing Importing data.
On The print cartridge is almost
empty.
On • The print cartridge is
empty.
• The print cartridge is not
set correctly.
• The tray has run out of
paper.
On A paper jam has occurred in
the machine.
On • The size of paper to print
on and the size of the
paper loaded in the tray
do not match.
• A cover is open.

Error and Status Indicate on the Control Panel

Solution
The status is normal.
The status is normal.
Replace the print cartridge
before it becomes empty.
• The print cartridge is
empty.
• Set the print cartridge
again correctly.
• Load paper into the tray.
Use Web Image Monitor or
Smart Organizing Monitor to
determine where the paper jam
is, and then remove the
jammed paper. See page 210
"Paper Feed Problems".
• Use Web Image Monitor
or Smart Organizing
Monitor to check the
paper size settings, and
then change either the
size of paper to print on
or the size of paper
loaded in the tray.
• Confirm that all the covers
are closed completely.
Draft 2014/01/07
233