Table of Contents
Advertisement
5. Scanning Originals
4.
Select the entry to modify, and then click [Change].
5.
Modify settings as necessary.
6.
Enter the administrator password if required.
7.
Click [Apply].
8.
Close the Web browser.
• You can unassign a Quick Dial entry from a One-touch button from the [Quick Dial Destination]
page. To do this, select the desired entry, click [Delete], and then click [Apply] again on a
confirmation page.
Deleting Scan Destinations
This section describes how to delete registered destinations.
1.
Start the Web browser, and access the machine by entering its IP address.
2.
Click [Scan Destination].
3.
Click the [E-mail Address], [FTP], or [Folder] tab.
4.
Select the entry to delete, and then click [Delete].
5.
Confirm that the entry you have selected is the entry that you want to delete.
6.
Enter the administrator password if required.
7.
Click [Apply].
8.
Close the Web browser.
86
opal-p2_mf2_com_user_guide_00142099_eng.xml
Draft 2014/01/07
Advertisement
Table of Contents
