Table of Contents
Advertisement
8. Configuring the Machine Using Utilities
Fax Received File Processing
Item
Received File
Processing
Print Automatically
Notify Forward Status
Forwarding Destination
Number of Trials of
Forwarding (time)
Interval of Forwarding
Trial (min.)
Toner Management Tab
MF
Toner Saving
Item
Toner Saving
174
Select whether received faxes are stored into the machine's memory for
printing or forwarded to a destination specified for [Forwarding
Destination].
Select whether the faxes received into the machine's memory are printed
automatically or stored for later manual printing.
Select whether e-mail notifications are sent after forwarding faxes or not.
Email notification destination depends on how [Forwarding Destination] is
specified:
• If specified with [E-mail Address]: the notification will be sent to the
administrator e-mail address specified in [Administrator E-mail
Address] in the [Administrator] page.
• If specified with [Scan Destination]: the notification will be sent to the
notification destination specified for the selected scan destination.
Note that if a destination e-mail address is not specified, no notification will
be sent even if this setting is enabled.
Specifies the forwarding destination.
• [E-mail Address]: Enter a destination e-mail address. Can contain up
to 64 characters.
• [Scan Destination]: Select a scan destination as a forwarding
destination.
Specifies how many times the machine attempts to forward a fax (1 to 255
times).
Specifies how many minutes the machine waits between forwarding
attempts (1 to 255 minutes).
Enable this setting to print using a reduced amount of toner when printing
out copies.
Description
Description
opal-p2_mf2_com_user_guide_00142134_eng.xml
Draft 2014/01/07
Advertisement
Table of Contents
