Table of Contents
Advertisement
Supply End Option
Item
Supply End Option
Interface Tab
Interface
Item
Fixed USB Port
opal-p2_mf2_com_user_guide_00142134_eng.xml
This setting is used to monitor the toner level.
• Stop Printing
Monitoring the toner level is enabled. The remaining toner level can
be checked in the control panel and on the Web Image Monitor.
• Continue Printing
The machine no longer monitors the toner level. Even when the toner
runs out, printing will continue and no messages will be displayed.
Specifies whether the same printer/PC-Fax driver can be used for
MF
multiple machines or not under USB connection.
If this setting is enabled, the same printer/PC-Fax driver you have
MF
installed in your computer can be used with any machine other than the one
originally used for installation, if the machine is of the same model.
If disabled, you must install the printer/PC-Fax driver separately for
MF
individual machines, because the machine other than the original will be
recognized as a new device upon USB connection.
Specifies whether the same printer can be used for multiple machines
P
or not under USB connection.
If this setting is enabled, the same printer driver you have installed in
P
your computer can be used with any machine other than the one originally
used for installation, if the machine is of the same model.
If disabled, you must install the printer driver separately for individual
P
machines, because the machine other than the original will be recognized
as a new device upon USB connection.
Configuring the System Settings
Description
Description
175
Draft 2014/01/07
Advertisement
Table of Contents
