Lane Change Signal; Headlight Switch; Parking Light Auto Cut - Hyundai Accent 2010 Owner's Manual

1
FEATURES OF YOUR HYUNDAI
76
B340B01A-AAT

Lane Change Signal

OMC049600
To indicate a lane change, move the
lever up or down to a point where it
begins flashing.
The lever will automatically return to the
center position when released.
B340C04FC-GAT

Headlight Switch

OMC049601
To operate the headlights, turn the bar-
rel on the end of the multi-function
switch. The first position turns on the
parking lights, sidelights, tail lights and
instrument panel lights. The second
position turns on the headlights.
NOTE:
The ignition must be in the "ON"
position to turn on the headlights.

Parking Light Auto Cut

o The purpose of this feature is to
prevent the battery from being dis-
charged.
The system automatically turns off
the headlights and parking lights when
the driver removes the ignition key
and opens the driver- side door.
o With this feature, the parking light
will be turned off automatically if the
driver parks on the side of road at
night.
If necessary, to keep the lights on
when the ignition key is removed,
perform the following :
1) Open the driver-side door.
2) Turn the parking lights OFF and
ON again using the light switch on
the steering column.