Hyundai Accent 2010 Owner's Manual page 247

1. Turn off the ignition and all other
switches.
2. Open the fuse box and examine
each fuse. Remove each fuse by
pulling it toward you (a small "fuse
puller" tool is contained in the relay
and fuse box of the engine room to
simplify this operation).
3. Be sure to check all other fuses
even if you find one that appears to
have burned out.
G200B02MC
4. Replace the blown fuse by pressing
a new fuse of the same rating into
place. The fuse should be a snug fit.
If it is not, have the fuse clip repaired
or replaced by a Hyundai dealer.
If you do not have a spare fuse, you
may be able to borrow a fuse of the
same or lower rating from an acces-
sory you can temporarily get along
without (the radio or cigarette lighter,
for example). Always remember to
replace the borrowed fuse.
Good Burned out
G200B02L
DO-IT-YOURSELF MAINTENANCE
!
CAUTION:
A burned-out fuse indicates that
there is a problem in the electrical
circuit. If you replace a fuse and it
blows as soon as the accessory is
turned on, the problem is serious
and should be referred to a Hyun-
dai dealer for diagnosis and repair.
Never replace a fuse with anything
except a fuse with the same or a
lower amperage rating. A higher
capacity fuse could cause damage
and create a fire hazard.
NOTE:
See page 6-35 for the fuse panel
descriptions.
6
21