Key Numbers; Limp Home Procedures - Hyundai Accent 2010 Owner's Manual

B880C01MC-GAT

Key Numbers

OMC027002
The vehicle key number is recorded
upon a number tag attached to the keys
when the vehicle is first delivered to
you.
The key number should be recorded
and kept in a safe place in case the
need to order further keys arises. New
keys are available from any Hyundai
dealer by quoting the relevant key num-
ber.
In the interest of security, the number
tag attached to the keys which bears
the key number should be removed
from the key string after you receive
your new vehicle. In addition, key num-
bers cannot be provided by Hyundai for
security reasons.
If you need additional keys or if you
should lose your keys, your authorized
Hyundai dealer can make new keys if
you can supply the key number.
B880D02A-GAT

Limp Home Procedures

HNF2011
In case the immobilizer warning indica-
tor blinks for five seconds when the
ignition key is turned to "ON" position,
this indicates that the immobilizer sys-
tem is out of order. And you cannot start
the engine without the limp home proce-
dures with ignition key.
The following procedure is how to start
the engine with the function of the limp
home. (0, 1, 2, 3 as a sample pass-
word).
FEATURES OF YOUR HYUNDAI
NOTE:
You can get the limp home pass-
word when the vehicle is first deliv-
ered to you. If you do not have the
password, consult your authorized
Hyundai dealer.
1. To set the password you may turn
the ignition key "ON" and then turn it
"OFF" according to the digit num-
bers, then the immobilizer indicator
will blink along with the operation of
the ignition key. For example, turn
the ignition key once for digit number
"1", and twice for "2", and so on.
However, for the digit number "0",
you must turn the ignition key for 10
times.
2. Wait for 3~10 seconds.
3. You may set the remaining number
of digits by following the same proce-
dures 1 and 2.
4. If all of four digits have been tried
successfully, turn the ignition key
"ON" and check that the immobilizer
indicator illuminates. From this time,
you have to start your engine within
30 seconds. If you start your engine
after 30 seconds, your engine will not
start.
1
7