Hyundai Accent 2010 Owner's Manual page 158

1
FEATURES OF YOUR HYUNDAI
146
1. AM Selection Button
Pressing the [AM] button selects the
AM band.
2. FM Selection Button
Turns to FM mode and toggles FM1 and
FM2 when the button is pressed each
time.
3. Automatic Channel Selection
Button
o When the [SEEK ] button is
pressed, it reduces the band fre-
quency by 50khz to automatically
select channel. Stops at the previ-
ous frequency if no channel is found.
o When the [SEEK ] button is
pressed, it increases the band fre-
quency by 50khz to automatically
select channel.
Stops at the previous frequency if no
channel is found.
4. Power ON/OFF & Volume
Control Button
Turns on/off the set when the IGNI-
TION SWITCH is on ACC or ON. If the
button is turned to the right, it increases
the volume and left, decreases the
volume.
5. SCAN Button
If this button is pressed, the frequen-
cies will become increased and receive
the corresponding broadcasts.
This function will play the frequencies
for 10 seconds each and find other
broadcasts as the frequency increases.
Press the button again when desiring to
continue listening to the currently play-
ing broadcast.
6. AUTO STORE Button
When the button is pressed, it auto-
matically selects and saves channels
with high reception rate to PRESET
buttons (1~6) and plays the channel
saved on PRESET1.
If no channel os saved after AST, it will
play the previous channel.
7. SETUP Button
Press this button to turn to the SCROLL
and P.BASS adjustment mode.
If no action is taken for 5 seconds after
pressing the button, it will return to the
play mode.(After entering SETUP mode,
move between items using the left,
right and PUSH functions of the TUNE
button.)
The setup Items changes from SCROLL
↔ P.BASS.
8. TUNE/ENTER Button
Turn this button clockwise one notch to
increase frequency from current fre-
quency.
Turn this button counterclockwise by
one notch to decrease frequency from
current frequency.
The frequency cahnges by 0.2Mhz in
FM MODE and 9Khz in AM MODE.
Press this button while holding SETUP
button to activate/inactivate the item
to.
Select SETUP item using left and right
function of the Tune button.