Installation On Outboard Rear Seats - Hyundai Accent 2010 Owner's Manual

1
FEATURES OF YOUR HYUNDAI
36
After installation of the child restraint
system, rock the child seat back and
forth, and side to side to ensure that it is
properly secured by the seat belt.
If the child seat moves, readjust the
length of the seat belt. Then, if equipped,
insert the child restraint tether strap
hook into the child restraint hook holder
and tighten to secure the seat. Always
refer to the child restraint system
manufacturer's recommendation before
installing the child restraint system in
your vehicle.
B230G02JM-GAT
Installation on Outboard Rear
Seats
OMC039304
To install a child restraint system in the
outboard rear seats, extend the shoul-
der/lap belt from its retractor. Install the
child restraint system, buckle the seat
belt and allow the seat belt to take up
any slack. Make sure that the lap por-
tion of the belt is tight around the child
restraint system and the shoulder por-
tion of the belt is positioned so that it
cannot interfere with the child's head or
neck. After installation of the child re-
straint system, try to move it in all
directions to be sure the child restraint
system is securely installed.
If you need to tighten the belt, pull more
webbing toward the retractor.
NOTE:
o Before installing the child restraint
system, read the instructions sup-
plied by the child restraint system
manufacturer.
o If the seat belt does not operate as
described, have the system
checked immediately by your au-
thorized Hyundai dealer.