Tire Chains; Tire Rotation - Hyundai Accent 2010 Owner's Manual

Hide thumbs Also See for Accent 2010:
Table of Contents

Advertisement

I050A01MC-AAT

TIRE CHAINS

Tire chains, if necessary should be
installed on the front wheels. Be sure
that the chains are installed in accor-
dance with the manufacturer's instruc-
tions.
To minimize tire and chain wear, do
not continue to use tire chains when
they are no longer needed.
!
WARNING:
o If your vehicle is equipped with
205/45R16 size tires, do not install
tire chains. This may cause dam-
age to the vehicle (wheels, sus-
pension and body) by chains con-
tacting the body.
o When driving on roads covered
with snow or ice, drive at less than
30 km/h (20 mph).
o Use the SAE "S" class or wire &
plastic chains.
o If you have noise caused by chains
contacting the body, retighten the
chain to avoid contact with the
vehicle body.
o To prevent body damage, retighten
the chains after driving 0.5~1 km.
o Don't use tire chains on a vehicle
equipped with aluminium wheels.
If it is unavoidable, use wire type
chains.
o Use wire chains less than 15 mm
to prevent damage to the chain's
connection.
CONSUMER INFORMATION
I060A02A-AAT

TIRE ROTATION

With temporary spare tire
I060A01TG
With full size spare tire
Spare tire
I060A02TG
Tires should be rotated every 10,000
km (6,000 miles). If you notice that
tires are wearing unevenly between
rotations, have the car checked by a
Hyundai dealer so the cause may be
corrected.
8
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Verna 2010

Table of Contents