Power On-Off Control Knob; Mode Select Knob; Fader Control; Balance Control - Hyundai Accent 2010 Owner's Manual

Hide thumbs Also See for Accent 2010:
Table of Contents

Advertisement

M420B01MC-GAT

1. POWER ON-OFF Control Knob

The radio unit may be operated when
the ignition key is in the "ACC" or "ON"
position. Press the knob to switch the
power on. The LCD shows the radio
frequency in the radio mode or the tape
direction indicator in the tape mode. To
switch the power off, press the knob
again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
2. BAND Select Button
Pressing the
button changes the
FM/AM
AM(MW, LW), FM1 and FM2 bands.
3. TUNE/MODE Select Knob
Rotate the knob clockwise to increase
the frequency and turn the knob coun-
terclockwise to reduce the frequency.

Mode Select Knob

Pressing the MODE knob changes the
BASS, MIDDLE, TREBLE, FADER and
BALANCE mode.
The mode selected is shown on the
display.
After selecting the each mode, rotate
the mode select knob clockwise or
counterclockwise.
BASS Control
To increase the BASS, rotate the knob
clockwise, while to decrease the BASS,
rotate the knob counterclockwise.
MIDDLE Control
To increase the MIDDLE, rotate the
knob clockwise, while to decrease the
MID, rotate the knob counterclockwise.
TREBLE Control
To increase the TREBLE, rotate the
knob clockwise, while to decrease the
TREBLE, rotate the knob counterclock-
wise.
FEATURES OF YOUR HYUNDAI

FADER Control

Rotate the control knob clockwise to
emphasize rear speaker sound (front
speaker sound will be attenuated). When
the control knob is turned counterclock-
wise, front speaker sound will be em-
phasized (rear speaker sound will be
attenuated).

BALANCE Control

Rotate the knob clockwise to empha-
size right speaker sound (left speaker
sound will be attenuated). When the
control knob is turned counterclock-
wise, left speaker sound will be empha-
sized (right speaker sound will be at-
tenuated).
4. AUTO SEEK Select Button
(Automatic Channel Selection)
Press the AUTO SEEK select button.
When the
side is pressed, the unit
will automatically tune to the next higher
frequency and when the
side is
pressed, it will automatically tune to the
next lower frequency.
1
127
127
127
127

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Verna 2010

Table of Contents