Wheel Cap (If Installed); Obtain Spare Tire And Tool - Hyundai Accent 2010 Owner's Manual

3
WHAT TO DO IN AN EMERGENCY
8
D060K01FC-GAT

Wheel Cap (If Installed)

Groove
D060K02MC
1. Wrap a piece of cloth around the tip
of the screwdriver to avoid scratch-
ing.
2. Insert the screwdriver into the groove
of the wheel cap and pry gently to
remove the wheel cap.
3. Change the flat tire.
4. Reinstall the wheel cap by fitting the
boss of the wheel cap in the groove
of the wheel, hitting the center of the
wheel cap with your hand.
D060B01MC-AAT

1. Obtain Spare Tire and Tool

D060B01MC-A
Remove the spare tire and take out the
jack and tool bag from the trunk.
NOTE:
The spare tire and tool is located
beneath the luggage mat in the ve-
hicle trunk or luggage compartment.
D060C01A-AAT
2. Block the Wheel
Flat tire
D060C02MC
Block the wheel that is diagonally oppo-
site from the flat to keep the vehicle
from rolling when the car is raised on
the jack.