Hyundai Accent 2010 Owner's Manual page 242

6
DO-IT-YOURSELF MAINTENANCE
16
Fluid level should be within
"HOT" range
G110D03MC
3. Confirm if the fluid level is in the
"HOT" range on the level gauge. If
the fluid level is lower, add the speci-
fied fluid from the fill hole. If the fluid
level is higher, drain the fluid from the
drain hole.
4. If the fluid level is checked in cold
condition[fluid temperature 20~30°C
(68~86°F)], add the fluid to the "COLD"
line and then recheck the fluid level
according to the above step 2.
!
WARNING:
The cooling fan is controlled by en-
gine coolant temperature and may
sometimes operate even when the
engine is not running. Use extreme
caution when working near the blades
of the cooling fan, so that you are not
injured by a rotating fan blade. As the
engine coolant temperature decreas-
es, the fan will automatically shut off.
This is a normal condition.
!
WARNING (Diesel only):
Never work on injection system with
engine running or within 30 seconds
after shutting off engine. High pres-
sure pump, rail, injectors and high
pressure pipes are subjected to high
pressure even after the engine has
been switched off. The fuel jet pro-
duced by fuel leaks may cause seri-
ous injury, if it contacts with the
body. People using pacemakers
should not move closer than 30cm to
the ECU or wiring harness within the
engine room with the engine run-
ning, since the high currents in the
Common Rail system produce con-
siderable magnetic fields.