How To Preset Stations - Hyundai Accent 2010 Owner's Manual

1
FEATURES OF YOUR HYUNDAI
128
5. Best Station Memory (BSM)
Button
When the BSM button is pressed, the
six channels from the highest field in-
tensity are selected next and stored in
memory. The stations selected are
stored in the sequence of frequency
from the first preset key.
6. PRESET STATION Select
Buttons
Six stations for AM(MW, LW), FM1 and
FM2 respectively can be preset in the
electronic memory circuit.

HOW TO PRESET STATIONS

Six AM(MW, LW) and twelve FM sta-
tions may be programmed into the
memory of the radio. Then, by simply
pressing the AM(MW, LW) / FM select
button and/or one of the six station
select buttons, you may recall any of
these stations instantly. To program
the stations, follow these steps:
o Press AM(MW, LW)/FM selector to
set the band for AM(MW, LW), FM1
and FM2.
o Select the desired station to be stored
by seek or manual tuning.
o Determine the preset station select
button you wish to use to access that
station.
o Press the station select button for
more than two seconds. A select
button indicator will show in the dis-
play indicating which select button
you have depressed. The frequency
display will flash after it has been
stored into the memory. You should
then release the button, and proceed
to program the next desired station.
A total of 24 stations can be pro-
grammed by selecting one AM(MW,
LW) and two FM station per button.
o When completed, any preset station
may be recalled by selecting AM(MW,
LW), FM1 or FM2 band and the
appropriate station button.
!
CAUTION:
o Do not place beverages close to
the audio system. The audio sys-
tem mechanism may be damaged
if you spill them.
o Do not strike or allow anything to
impact the audio system, damage
to the system mechanisms could
occur.