Installation On Rear Seat Center Position; 2-Point Static Type; 3-Point Type - Hyundai Accent 2010 Owner's Manual

o Children who are too large to be in
a child restraint should sit in the
rear seat and be restrained with
the available lap/shoulder belts.
Never allow children to ride in the
front passenger seat.
o Always make sure that the shoul-
der belt portion of the outboard
lap/shoulder belt is positioned
midway over the shoulder, never
across the neck or behind the back.
Moving the child closer to the
center of the vehicle may help
provide a good shoulder belt fit.
The lap belt portion of the lap/
shoulder belt or the center seat lap
belt must always be positioned as
low as possible on the child's hips
and as snug as possible.
o If the seat belt will not properly fit
the child, Hyundai recommends
the use of an approved booster
seat in the rear seat in order to
raise the child's seating height so
that the seat belt will properly fit
the child.
o Never allow a child to stand up or
kneel on the seat.
o Never use an infant carrier or child
safety seat that "hooks" over a
seatback; it may not provide ad-
equate security in an accident.
o Never allow a child to be held in a
person's arms while they are in a
moving vehicle, as this could re-
sult in serious injury to the child
in the event of an accident or a
sudden stop. Holding a child in a
moving vehicle does not provide
the child with any means of pro-
tection during an accident, even if
the person holding the child is
wearing a seat belt.
o If the child restaint seat is not
anchored properly, the risk of a
child being seriously injured or
killed in a collision greatly in-
creases.
FEATURES OF YOUR HYUNDAI
B230F01A-AAT
Installation on Rear Seat Center
Position

2-point static type

B230F01MC

3-point type

B230F02MC
Use the center seat belt for the rear to
secure the child restraint system as
illustrated.
1
35