Overdrive Switch; Ignition Key Interlock System - Hyundai Accent 2010 Owner's Manual

o The brake pedal fully depressed in
order to move the shift lever from
the "P" (Park) position to any of
the other positions.
o It is always possible to shift from
"R", "N", "D", "2", "L" position to
"P" position. The vehicle must
be fully stopped to avoid
transaxle damage.
C090I02MC-AAT
!
CAUTION:
o Shift into "R", "D" and "P" posi-
tion only when the vehicle has
completely stopped.
o Do not accelerate the engine in
reverse or any of the forward
positions with the brakes applied.
o Always apply the footbrake when
shifting from "P" or "N", to "R",
"D", "2" or "L" position.
o Do not use the "P" (Park) position
in place of the parking brake.
Always set the parking brake,
shift the transaxle into "P" (Park)
position and turn off the ignition
when you leave the vehicle, even
momentarily.
Never leave the vehicle unattended
while the engine is running.
o When accelerating from a stop on
a steep hill, the vehicle may have
a tendency to roll backwards. Shift-
ing the shift lever into 2nd gear
will help prevent the vehicle from
rolling backwards.
o Check the automatic transaxle fluid
level regularly, and add fluid as
necessary.
o See the maintenance schedule for
the proper fluid recommendation.
C090P01A-GAT

Overdrive Switch

OMC035016
DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
When the overdrive switch is turned on,
the transaxle will automatically upshift
to the second, third and overdrive gears.
When the overdrive switch is turned off,
the transaxle will not upshift to the
overdrive gear. For normal driving, the
selector lever should be left in the "D"
position and the overdrive switch turned
on.
If you need to accelerate rapidly, press
the accelerator pedal all the way to the
floor. The transaxle will automatically
shift to a lower gear, depending on the
vehicle speed and load.
E060103AUN

Ignition key interlock system

(If Installed)
The ignition key cannot be removed
unless the shift lever is in the P (Park)
position. If the ignition switch is in any
other position, the key cannot be re-
moved.
2 2
11 11