G080B01HR-GAT
Replacing the Wiper Blades
To replace the wiper blades, raise the
wiper to the vertical.
To remove the wiper blade
(1)
HHR5048
1. Push down the wiper blade with the
locking clip (1) pressed to detach it
from the wiper arm.
HHR5049
2. Raise the wiper blade lightly and pull
up it.
To install the wiper blade
HHR5050
1. Put a new wiper blade onto the wiper
arm and lower the wiper blade at the
level of the wiper arm as shown in the
drawing.
DO-IT-YOURSELF MAINTENANCE
HHR5051
2. Pull up the wiper blade until you hear
an audible "click" to engage in the
end of the wiper arm.
NOTE:
Do not allow the wiper arm to fall
against the windshield.
6
13