Save The Current Route; Start Navigation On A Saved Route - Humminbird i-PILOT LINK Operation Manual

Save the Current Route

A route must have at least two waypoints to be saved as a route.
1. Chart X-Press Menu: With a Chart View displayed on-screen, press the MENU key once.
2. Select Save Current Route. Press the RIGHT Cursor key.
3. Follow the on-screen prompts to save or discard the route.
Cancel Navigation (Disengage)
1. During navigation, press the GO TO key.
2. Select Cancel Navigation. Press the RIGHT Cursor key.

Start Navigation on a Saved Route

1. Use the Cursor Control key to move the cursor to a waypoint on a route.
If you select the first waypoint in the route, the route will turn red.
Networked Control Heads: To start navigation on a shared route, select the control head you used to save it.
2. Press the GO TO key.
3. Select the route name. Press the RIGHT Cursor key.
4. Select a travel order.
Go To Point
Forward from
Point
Reverse from
Point
Travel Forward
Travel Reverse
Start navigation to the selected waypoint only.
Start navigation to the selected waypoint and continue traveling the route forward from there.
Start navigation to the selected waypoint and travel the route in reverse from there.
Start navigation to the first waypoint in the route and continue traveling the route forward
from there.
Start navigation to the last waypoint in the route and travel the route in reverse from there.