Turn On Auto Upload Data; Turn On/Off Prop Auto On; Set The Arrival Mode - Humminbird i-PILOT LINK Operation Manual

3

| Turn on Auto Upload Data

Turn on Auto Upload Data to upload saved iTracks and Spot-Locks from the i-Pilot Link. When Auto Upload Data is turned on, saved
iTracks and Spot-Locks from the i-Pilot Link are transferred to the HELIX control head, and saved iTracks and Spot-Locks from the
HELIX control head are transferred to the i-Pilot Link. Data will be transferred when you power on the HELIX control head, as well
as any time new data is created on the i-Pilot unit or the HELIX control head.
Turn on Auto Upload Data
1. From the i-Pilot Settings menu, select Auto Upload Data.
2. Select On.
NOTE: If there is not enough available memory space on the control head, an error message will display and data will not be
transferred until more space is created on the HELIX control head.
NOTE: For more information about exporting navigation data, see Manage your i-Pilot Link Navigation Data.
4

| Turn on/off Prop Auto On

When Prop Auto On is turned on, the i-Pilot Link will start the selected navigation mode as soon as it is selected. The propeller will
turn on at the current speed setting. If the Prop Auto On menu is turned on, but the propeller is not turning, the speed might be set
to 0. See Propeller Controls for more information.
When Prop Auto On is turned off, you must start the propeller manually each time you select an i-Pilot Link navigation mode.
However, this menu does not apply to Spot-Locks and Cruise Control. These navigation modes will turn on the propeller as soon as
they are engaged, regardless of the Prop Auto On setting.
WARNING! Spot-Locks and Cruise Control will turn on the propeller as soon as they are engaged, regardless of the Prop Auto On
setting.
Turn on/off Prop Auto On
1. From the i-Pilot Settings Menu, select Prop Auto On.
2. Select On or Off.
WARNING! When Prop Auto On is turned on, the propeller will turn on when navigation features are used. Navigation features
include working with iTracks and AutoPilot. Be sure the prop is clear from obstructions and hazards when using navigation
features.
5

| Set the Arrival Mode

When you are navigating with the i-Pilot Link and reach the destination, set the Arrival Mode menu option to tell the system what
to do next. The setting will determine if you will control the boat manually or transition to another type of i-Pilot Link navigation after
the destination point is reached.
The Arrival Mode setting affects iTracks, routes, waypoints, and Spot-Locks. It does not apply to Follow the Contour or Circle Mode.
1. From the i-Pilot Settings menu, select Arrival Mode.
2. Select one of the following menu options: