Table Of Contents - Humminbird i-PILOT LINK Operation Manual

Table of Contents

Overview4
Safety And Cautions While Using I-Pilot Link4
Installation5
Purchase Ethernet Cables And Equipment5
Confirm Installation Of I-Pilot Link Controller And Remote5
Connect The I-Pilot Link To The Helix Control Head6
Confirm I-Pilot Link Connection On The Helix Control Head7
Confirm The I-Pilot Link Connection7
Check Gps Reception8
Reviewing Gps Reception8
Update Software9
Export Navigation Data9
Register Your Humminbird Products9
Update The Control Head Software10
Restart The System10
Configure I-Pilot Link With The Control Head11
Open The I-Pilot Settings Menu11
Enable I-Pilot Link Navigation11
Turn On Auto Upload Data12
Turn On/Off Prop Auto On12
Set The Arrival Mode12
I-Pilot Link Navigation Go To Menu Options13
Install A Map Card (Optional)13
Set The Water Level Offset14
Water Level Offset (Set To 0 = Off)14
Water Level Offset Adjusted To -414
Adjust I-Pilot Link Alarms15
Adjust The I-Pilot Pre-Arrival Alarm15
Adjust The I-Pilot Off Course (Xte) Alarm16
Display Digital Readout Boxes17
Show I-Pilot Status Icons17
Customize Digital Readouts18
Display Humminbird Lakemaster Contour Lines And Depth Ranges19
Adjusting The Lakemaster Display Settings19
Show/Hide Contour Lines20
Turn On Depth Colors20
Highlight A Depth Range20
Highlight A Shallow Water Range20
Deploy Or Stow The Ulterra Trolling Motor21
Deploy The Motor21
Stow The Motor21
Pause Deploying Or Stowing21
I-Pilot Link Navigation Overview22
Open The Chart View22
Open The I-Pilot X-Press Remote23
Using The I-Pilot X-Press Remote24
Display The I-Pilot X-Press Remote Pane In Chart View25
Selecting The I-Pilot X-Press Remote Pane25
Start I-Pilot Link Navigation26
Open The Go To Menu26
Cancel I-Pilot Link Navigation (Disengage)27
Mark I-Pilot Link Navigation27
Propeller Controls28
Start Or Stop The Propeller28
Steer29
Steering With The X-Press Remote29
Increase Or Decrease Speed30
Increasing/Decreasing The Prop Speed Manually30
Engage High Speed Bypass (Hsb)31
Engage High Speed Bypass31
Cruise Control32
Engage Cruise Control32
Increasing/Decreasing The Target Cruise Control Speed32
Adjust Cruise Control Speed33
Disengage Cruise Control33
Spot-Locks34
Mark And Save A Spot-Lock35
Start Spot-Lock Navigation35
Mark A Spot-Lock At The Boat Position35
Mark A Spot-Lock At The Cursor Position35
Engaging Spot-Lock At The Boat Position36
Engage Spot-Lock At The Cursor Position37
Navigating To A Spot-Lock At The Cursor Position37
Navigate To A Saved Spot-Lock38
Engage Spot-Lock At A Waypoint Position38
Engaging Spot-Lock At The Selected Waypoint38
Jog Spot-Lock (Heading Sensor Required)39
Engaging Spot-Lock At The Boat Position (Chart View With X-Press Remote Pane Displayed)40
Cancel Navigation (Disengage)41
Delete A Saved Spot-Lock In The Chart View41
Edit A Saved Spot-Lock41
Convert A Spot-Lock To A Waypoint42
Show/Hide A Spot-Lock42
Changing The Spot-Lock Name42
Waypoints43
Mark A Waypoint43
Mark A Waypoint At The Boat Position43
Mark A Waypoint At The Cursor Position43
Start Navigation To A Saved Waypoint Or Position45
Delete A Saved Waypoint In The Chart View46
Edit A Saved Waypoint46
Changing The Waypoint Name47
Convert A Waypoint To A Spot-Lock48
Show/Hide A Waypoint48
Circle Mode49
Navigate In Circle Mode50
Start Circle Mode At The Vessel Position50
Navigating In Circle Mode At The Boat Position50
Start Circle Mode At The Cursor Position51
Adjust Circle Mode Settings52
Reverse Direction During Circle Mode52
Adjust The Radius During Circle Mode52
Itracks53
Record An Itrack55
Start Recording55
Navigate A Saved Itrack56
Stop Recording56
Navigate A Saved Itrack On The Chart View56
Navigating A Saved Itrack (Navigate To Start)57
Move A Saved Itrack58
Navigate To A Saved Itrack From The Go To Menu58
Reverse Direction During Itrack Navigation58
Edit A Saved Itrack60
Show/Hide An Itrack60
Backtrack61
Adjust The Backtrack Distance61
Start Backtrack Navigation61
Follow The Contour63
Install The Map Card63
Set The Contour Lines To Visible63
Reverse Direction66
Follow An Offset Distance From A Contour67
Follow Bottom Hardness Or Vegetation67
Display Bottom Hardness Or Vegetation67
Hide Layers67
Follow Bottom Hardness68
Follow Vegetation68
Routes69
Create A Route And Start Navigation69
Save The Current Route70
Start Navigation On A Saved Route70
Edit A Saved Route71
Show/Hide A Route71
Autopilot72
Advanced Autopilot73
Legacy Autopilot74
Autopilot Overview75
Start Autopilot Navigation75
Select The Autopilot Mode75
Start Autopilot Based on the Motor's Heading76
Start Autopilot Towards The Cursor Position76
Adjust The Heading77
Adjust The Autopilot Heading77
Cancel Navigation78
Manage Your I-Pilot Link Navigation Data79
Open The Waypoint Management Dialog Box79
Sort79
Select A File79
Selecting Files In The Waypoint Management Dialog Box (Waypoints, Routes, Tracks)80
Jump To The Top81
Open The Spot-Lock Submenu82
Open The Itrack Submenu83
Export Nav Data84
Export All Navigation Items84
Export Selected Navigation Items84