Routes; Create A Route And Start Navigation - Humminbird i-PILOT LINK Operation Manual

R
OUTES
Routes link two or more waypoints together to create a path for navigation. A route represents your intended navigation and shows
the shortest path from each data point to the next. The distance between each waypoint is a route leg. You can save 47 routes (with
50 waypoints each) to the control head.
WARNING! Watch for a turning propeller and be prepared for boat movement when working with routes. If Prop Auto On is turned
on, the propeller will automatically turn on when a route is navigated, even if the engagement is accidental. A turning propeller
can cause injury. If the boat does not move, confirm the prop is turned on in the menu system (see Propeller Controls

Create a Route and Start Navigation

Use the instructions in this section to connect waypoints and start navigation immediately.
1. Use the Cursor Control key to move the cursor to a waypoint or position on the chart.
2. Press the GO TO key twice.
3. Repeat steps 1 and 2 to add more waypoints to the route.
Creating and Navigating a Route
next waypoint in the route
Move the Cursor
route start point
Press Twice to Start
Navigation
).