Related Manuals for Humminbird 1100CI Series
Summary of Contents for Humminbird 1100CI Series
- Page 1 ETHERNET NETWORKING Installation and Operations Manual 531906-3EN_A Unit 1 Unit 2 Humminbird ETHERNET...
- Page 2 HANK Thank you for choosing Humminbird®, the #1 name in marine electronics. Humminbird has built its reputation by designing and manufacturing top quality, thoroughly reliable marine equipment. Your Humminbird is designed for trouble-free use in even the harshest marine environment. We encourage you to read this manual carefully in order to get the full benefit from all the features and applications of your Humminbird product.
- Page 3 360 Imaging®, 700 Series™, 800 Series™, 900 Series™, 1100 Series™, Down Imaging®, DualBeam PLUS™, Fish ID+™, HELIX™, Humminbird®, InterLink™, RTS Window™, Side Imaging®, SwitchFire®, WhiteLine™, and X-Press™ Menu are trademarked by or registered trademarks of Johnson Outdoors Marine Electronics, Inc.
-
Page 5: Table Of Contents
Fishing System Defaults to Simulator with a Transducer Attached ......33 Contact Humminbird... -
Page 7: Introduction
4. Share Waypoints Alarms, navigation, sonar data, and the menu system are all affected by the Ethernet network settings. We encourage you to read this manual completely so that you may understand the full capabilities of your Humminbird Ethernet network. -
Page 8: Install An Ethernet Connection
THERNET ONNECTION If your Humminbird control head has a built-in Ethernet connector, the unit can be connected to the Ethernet network. When you connect the units together, data is shared between the two units. Before you start, please note that the Ethernet network installation has the following requirements: •... - Page 9 1100ci Series HD Control Head with Hourglass-shaped Ethernet Port 1100c Series Control Head with Round Ethernet Port Ethernet port Ethernet port 800ci Series/900ci Series HD Control Head with Hourglass-shaped Ethernet Port 800c Series/900c Series Control Head with Round Ethernet Port...
- Page 10 HELIX 9, 10, 12 (Cable Tray) with Connecting the Cable Tray to the Control Head (HELIX 9, 10, 12) Hourglass-shaped Ethernet Port Ethernet line up with pins on cable tray clasp Humminbird logo facing up Installation...
- Page 11 Connecting to a Round Ethernet Port Hand-Tightening the Screw Nut screw nut The connector is keyed to prevent incorrect installation. AS EC (length)E Ethernet port Connecting the Ethernet Cables to a 700 Series HD Unit 700 Series HD Quick Disconnect Mount Cable Collector Ethernet port Ethernet...
-
Page 12: Power On
2. P OWER When you have installed an Ethernet network, the power on process is the same as powering on a single control head, however, your transducer connections will determine how the control head starts normal operation. If there is a transducer connected to only one of the control heads, and you intend to share the transducer on the network, power on the control head with the connected transducer first. -
Page 13: Ethernet Network Overview
VERVIEW When the Humminbird network is installed, each control head automatically selects a primary source (transducer, temperature, and GPS). The control head selects the equipment connected to it as its primary source, but you can choose any compatible source on the network. -
Page 14: Customize The Unit Name
USTOMIZE THE Each control head is assigned a unit name, which is based on its model number and serial number. Use the following instructions to edit the unit name, so it is easier to identify each unit on the network. 1. -
Page 15: Open The Network Source Setup Dialog Box
PEN THE ETWORK OURCE ETUP IALOG The Network Source Setup dialog box displays all the sources connected to the network. The sources may be shared on the network or operating locally with their connected control head. Open the Network Source Setup Dialog Box 1. - Page 16 Network Source Setup Dialog Box (HELIX Series) source tabs status tab Grayed-out Source: The transducer source sonar sources connection is lost. temperature sources from transducers and accessories GPS source If the Unit Name is changed, the new name will be displayed here. See Customize the Unit Name.
-
Page 17: Sonar Source Overview
ONAR OURCE VERVIEW When you select a new transducer source, the alarms, menu settings, view rotation, and digital readouts will update automatically on the control head. • Menu Settings: If the sonar source is shared, the control heads will synchronize menu settings (Shared), while other menu settings will continue to operate individually (Local) on each control head. -
Page 18: Set Up Sonar
Set up Sonar Use the instructions below to select sonar sources for each control head. Before you can select frequencies from the network, the control heads must be set up with their connected transducer. 1. Set up the Transducer The following instructions are only required the first time you set up each control head with an attached transducer. 1. -
Page 19: Select A Sonar Source
Select a Sonar Source When you first set up the network, the control head will automatically choose the transducer connected to it. Use the Network Source Setup dialog box to change the sonar source. The transducer you select on the 2D tab will provide the data for the 2D Sonar Views and related digital readouts. If you select a Down Imaging transducer on the Adv. - Page 20 As you select sonar sources for each view, it is important to consider the following information: Default: When you first set up the network, the control head will automatically choose the transducer source connected to it. You can use the default settings, or you can select which transducer you want to use. Compatibility: If your 700, 800, 900, or 1100 Series model number ends in 8, your control head must be compatible with the transducer you select on the network to use it as a sonar source.
- Page 21 Selecting Beams for the Side Imaging View (HELIX Series) available sonar sources Select Scroll through the List Select Sonar Sources...
-
Page 22: Change From A Lost Sonar Source
Change from a Lost Sonar Source If the control head cannot detect the selected transducer, follow the on-screen prompts to switch to another transducer in the network. If you switch to a Local source, you are selecting the transducer connected directly to the control head. Changing the Sonar Source (700 Series HD) Changing the Sonar Source (HELIX Series) Sonar Sources... -
Page 23: Temperature Source Overview
EMPERATURE OURCE VERVIEW When you select a new temperature source, the alarms, menu settings, view rotation, and digital readouts will automatically update on the control head. • Menu Settings: If the temperature source is shared, the control heads will synchronize menu settings (Shared), while other menu settings will continue to operate individually (Local) on each control head. - Page 24 2. Select the tab for T1, T2, T3, or T4. Each tab represents a digital readout position on the screen. NOTE: The temperature readout positions may vary with the Humminbird model. See the Views section and Select Readouts section of your Humminbird Operations Manual for more information.
- Page 25 Selecting a Temperature Source for Digital Readout Position 1 Temp 1 tab sets the temperature source for digital readout 1 on the screen. selected The control head detects all the temperature sources in the network. unit name unit model temperature source type column column number (from transducers or accessories)
-
Page 26: Change From A Lost Temperature Source
Change from a Lost Temperature Source To change the temperature source after the network has been configured, open the Network Source Setup dialog box to change the temperature sources at any time (see Select a Temperature Source). Network settings are saved even after the unit is powered off. •... - Page 27 Temperature Source Lost (HELIX Series) If you switch to a Local source, you are selecting the transducer or temperature accessory connected directly to the control head. Temperature Sources...
-
Page 28: Gps Source And Sharing Waypoints Overview
GPS S OURCE AND HARING AYPOINTS VERVIEW When you select a new GPS source, the position, menu settings, view rotation, and digital readouts will automatically update on the control head. To view waypoint data on the network, it is important to understand the GPS source and how to share waypoint data. •... -
Page 29: Select A Gps Source
Select a GPS Source When you power on the network for the first time, the control head will automatically choose the connected or internal GPS receiver to provide data to the control head. Use the instructions below to change the GPS source for the selected control head. Select a GPS Source 1. -
Page 30: Change From A Lost Gps Source
Change from a Lost GPS Source If the control head cannot detect the set GPS receiver, the control head will display an error message so that you can reset the GPS source as follows: • If the shared GPS receiver is not detected, the control head will switch automatically to the local GPS receiver (internal or connected to the control head). -
Page 31: Share Waypoints
Share Waypoints To share waypoints on the network, turn on Share Waypoints on each control head. You can then observe the following: • When a waypoint is marked on one control head, the waypoint will also be displayed on the other control head. If the waypoint is saved, it will be saved to the local control head where it was marked. -
Page 32: Restore Defaults (Setup Menu Tab)
ETUP If you choose to restore defaults on a Humminbird control head, it is important to note that the menu settings, including your saved network settings, will be reset to their factory defaults. See your Humminbird control head operations manual for more information. -
Page 33: Troubleshooting
ROUBLESHOOTING Before contacting Humminbird Customer Service, please read the following section. Taking the time to review these troubleshooting guidelines may allow you to solve a performance problem yourself, and therefore avoid sending your unit back for repair. Fishing System Doesn’t Power Up If your Fishing System doesn’t power up, use the installation guide that is included with your Fishing System to confirm specific... -
Page 34: Contact Humminbird
ONTACT UMMINBIRD Contact Humminbird Customer Service in any of the following ways: Web site: humminbird.com E-mail: service@humminbird.com Telephone: 1-800-633-1468 Direct Shipping: Humminbird Service Department 678 Humminbird Lane Eufaula, AL 36027 USA Hours of Operation: Monday - Friday 8:00 a.m. to 4:30 p.m. (Central Standard Time) Social Media Resources: Facebook.com/HumminbirdElectronics...