Move A Saved Itrack; Navigate To A Saved Itrack From The Go To Menu; Reverse Direction During Itrack Navigation - Humminbird i-PILOT LINK Operation Manual

Navigate to a Saved iTrack from the Go To Menu

Use the following instructions to start iTrack navigation from any view.
1. Press the GO TO key.
2. Select Nav Data. Press the RIGHT Cursor key.
3. Select an iTrack to Start or iTrack to End from the Go To list. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the iTrack position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).

Reverse Direction During iTrack Navigation

If you are navigating a saved iTrack, you can quickly change the navigation direction toward the Start Point or End Point. For example,
if the i-Pilot Link is navigating to the Start Point, selecting Reverse will start i-Pilot Link navigation in the opposite direction, towards
the End Point.
1. During navigation on a saved iTrack, press the GO TO key.
2. Select Reverse Navigation. Press the RIGHT Cursor key.
CAUTION! Be prepared for boat movement as the prop will automatically be enabled and the prop speed will automatically adjust
to move the boat to the iTrack position. If the boat does not move, confirm the prop is turned on in the menu system (see
Propeller Controls).
Cancel Navigation (Disengage)
1. Press the GO TO key.
2. Select Cancel Navigation.
3. Press the RIGHT Cursor key.

Move a Saved iTrack

Use the following instructions to move the position of a saved iTrack on the Chart View.
NOTE: If you have more than one networked control head installed, select the control head you used to record the iTrack.
1. Use the Cursor Control key to select a Start Point icon or End Point icon on the iTrack.
2. Press the MENU key.
3. Select the iTrack name. Press the RIGHT Cursor key.
4. Select Move. Press the RIGHT Cursor key.
5. Select Direction or Distance. Press the RIGHT or LEFT Cursor keys to adjust the setting.
As you adjust the setting, an arrow is displayed on-screen to indicate the change.
6. Select Move iTrack. Press the RIGHT Cursor key.