Confirm I-Pilot Link Connection On The Helix Control Head; Confirm The I-Pilot Link Connection - Humminbird i-PILOT LINK Operation Manual

4

| Confirm i-Pilot Link Connection on the HELIX Control Head

After connecting the i-Pilot Link to the HELIX control head, it is important to confirm the connection on the HELIX control head. All
equipment should be connected and powered before you turn on the HELIX control head.
1. Turn on the power source and i-Pilot Link equipment.
2. On the HELIX control head, press the POWER key.
3. When the Title screen is displayed, press the MENU key.
4. Select Normal. Press the RIGHT Cursor key.
5

| Confirm the i-Pilot Link Connection

1. Press and hold the VIEW key.
2. Select System > Accessory Test.
Confirm the i-Pilot is listed as Connected. It may take up to one minute for the i-Pilot to be detected.
Unconnected: If it is listed as Unconnected, check the cable and power connections to confirm they are secure and powered
on. Review the installation guide that was included with your i-Pilot Link to confirm it is installed correctly.
NOTE: The menus for installed accessories are typically included in the Accessories tab in the Main Menu. See your accessory guide
for details. For the latest list of accessories that are compatible with your control head, visit our Web site.
Confirming i-Pilot Link is Connected
connected
unconnected
(not detected
by the control
head)