Update Software; Export Navigation Data; Register Your Humminbird Products - Humminbird i-PILOT LINK Operation Manual

U S
PDATE OFTWARE
Your control head model may need a software update to work with the i-Pilot Link. We recommend that you read the following
section completely before starting any software updates.
Control Head Software: Version 1.35 or later is required to use the i-Pilot Link with the HELIX control head. To check the software
version installed on your control head, press and hold the VIEW key. Select System > Accessory Test.
i-Pilot Link Remote and Controller: See your i-Pilot Link Owner's Manual to update the software on the remote and controller.
Supplies: In addition to your Humminbird equipment, you will need a PC with Internet access and a blank SD card or microSD card.
1

| Export Navigation Data

Before the HELIX control head software is updated or restored to system defaults, export your navigation data.
WARNING! Humminbird is not responsible for the loss of data files (waypoints, routes, tracks, groups, snapshots, recordings, etc.)
that may occur due to direct or indirect damage to the unit's hardware or software. It is important to back up your control head's
data files periodically. Data files should also be saved to your PC before restoring the unit's defaults or updating the software.
1. Install the SD card or microSD card according to the instructions in your control head operations manual.
For card compatibility type, see your control head operations manual.
2. Power on the control head.
3. Main Menu: Press the MENU key twice. Select the Nav tab.
4. Select Waypoints, Routes, Tracks. Press the RIGHT Cursor key.
5. Select Options > Select All and... > Export.
6. Follow the on-screen prompts to confirm or cancel the export.
2

| Register your Humminbird Products

Set up an online account and register your Humminbird equipment so that you will receive the latest Humminbird news, including
accessory compatibility and software update information.
Go to our Web site Select Support > Register your Product. If you already have a
account, select My Humminbird.
Follow the on-screen prompts to create a new account and register your
products.