Collating Copies Into Sets In Page Order (Collate) - Canon IR1600 Copying Manual

When <Staple> Is Set
Copies are automatically collated into sets arranged in page order, stapled, and output into the
trays, as shown below.
1

Collating Copies into Sets in Page Order (Collate)

This section explains the settings to perform each collation mode. The setting differs depending on
the mode, so follow the procedure below to make the required setting for the desired collation
mode.
1
Place your original.
100% AUTO PAPER
TEXT
2
Press
lights.
NOTE
When <5.AUTO SORT> is set to <ON>, the Collate or Offset Collate mode is automatically set when you place the
originals in the feeder. (See "Setting the Automatic Collate On/Off," on p. 3-8.)
If you want to set <Rotate> collation
Set <6.SORT ROTATE> to <ON> before making copies. (See "Setting the Rotate Collate
On/Off," on p. 3-9.)
Go on to step 3.
1-20 Collating Copies (Finisher)
Originals Copy set 1
Three sets of copies
specified
1
2
3
4
(Finisher) repeatedly until the indicator for the collate function (
Copy set 2 Copy set 3
01
)