Display Transceiver Manuinfo - HP MSR Series Command Reference Manual

Field
Wavelength(nm)
Transfer Distance(xx)
Digital Diagnostic
Monitoring
Ordering Name

display transceiver manuinfo

Use display transceiver manuinfo to display the electronic label information of transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the electronic label information of the transceiver modules on all
interfaces.
Usage guidelines
This command displays only part of the electronic label information.
Examples
# Display the electronic label information for the transceiver module in interface GigabitEthernet 2/1/1.
<Sysname> display transceiver manuinfo interface gigabitethernet 2/1/1
GigabitEthernet2/1/1 transceiver manufacture information:
Description
•
Fiber transceiver: Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
•
Copper cable: Displayed as N/A.
Transmission distance, where "xx" indicates the distance unit:
•
km—Kilometers, for single-mode transceiver modules.
•
m—Meters, for other transceiver modules.
If the transceiver module supports multiple types of transmission media, this field
displays the transmission distance for each type of transmission medium, in the form
transmission distance (medium type).
Transmission medium types include:
•
9 um—9/125 μm single-mode fiber.
•
50 um—50/125 μm multi-mode fiber.
•
62.5 um—62.5/125 μm multi-mode fiber.
•
TP—Twisted pair.
•
CX4—CX4 cable.
Support for the digital diagnosis function:
•
YES—Supported.
•
NO—Not supported.
Product code.
241