Rename - HP MSR Series Command Reference Manual

network-operator
Parameters
remotefile: Specifies the name of the file on the FTP server.
localfile: Specifies the name of the local file.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
If a file download is not completed due to network or storage space problems, use this command to get
the part that has not been downloaded yet.
Examples
# Get the part of the s.bin file that is missing due to transmission interruption.
ftp> reget s.bin
local: s.bin remote: s.bin
350 Restarting at 1749706
150-Connecting to port 47429
150 38143.3 kbytes to download
226 File successfully transferred
39058742 bytes received in 66.2 seconds (576.1 kbyte/s)

rename

Use rename to rename a file.
Syntax
rename [ oldfilename [ newfilename ] ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
oldfilename: Specifies the original file name.
newfilename: Specifies the new file name.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Rename the file a.txt as b.txt.
Method 1:
•
ftp> rename
(from-name) a.txt
(to-name) b.txt
350 RNFR accepted - file exists, ready for destination
250 File successfully renamed or moved
118