Scheduler Job - HP MSR Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
This command is disruptive. Use this command only when you cannot troubleshoot the device by using
other methods, or you want to use the device in a different scenario.
This command does the following:
Deletes all configuration files (.cfg files) in the root directories of the storage media.
•
Deletes all log files (.log files in the folder /logfile).
•
Clears all log information (in the log buffer), trap information, and debugging information.
•
Restores the parameters for the BootWare to the factory-default settings.
•
• Deletes all license files (.ak files).
After this command is executed, only the items required for fundamental device operation are retained,
including the .bin files, the MAC addresses, and the electronic label information.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to the factory default configuration and clear the
operation data. Continue [Y/N]:y
Restoring the factory default configuration. This process might take a few minutes. Please
wait.................................................................................
.........................Done.
Please reboot the system to place the factory default configuration into effect.
Related commands
reboot

scheduler job

Use scheduler job to create a job and enter job view. If the job already exists, you enter job view directly.
Use undo scheduler job to delete a job.
Syntax
scheduler job job-name
undo scheduler job job-name
Default
No job exists.
Views
System view
256