Help - HP MSR Series Command Reference Manual

To save the downloaded file to some other directory, the localfile argument must specify the target
directory plus the file name such as flash:/subdirectory/a.cfg. Otherwise, the command fails to take
effect.
Examples
# Download file a.txt and save it as b.txt in the working directory accessed by the ftp command.
ftp> get a.txt b.txt
local: b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download file a.txt to the folder test from the working directory accessed by the ftp command.
ftp> get a.txt flash:/test/b.txt
local: flash:/test/b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# On an MSR4000, download file a.txt to the root directory of the flash memory on the standby MPU (in
slot 1). Save the file as c.txt.
ftp> get a.txt slot1#flash:/c.txt
local: slot1#flash:/c.txt remote: a.txt
150 Connecting to port 47460
226 File successfully transferred
1569 bytes received in 0.0564 seconds (27.2 kbyte/s)
Related commands
put

help

Use help to display all commands supported by an FTP client.
Use help command-name to display the help information of a command.
Syntax
help [ command-name ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
command-name: Specifies a command supported by the FTP client.
Usage guidelines
In FTP client view, executing the help command is the same as entering?.
Examples
# Display all commands supported by the FTP client.
110