Monitor Cpu-Usage Interval; Password-Recovery Enable - HP MSR Series Command Reference Manual

monitor cpu-usage interval

Use monitor cpu-usage interval to set the CPU usage sampling interval.
Syntax
MSR1000/MSR2000/MSR3000:
monitor cpu-usage interval interval-value
MSR4000:
monitor cpu-usage interval interval-value [ slot slot-number [ cpu cpu-number ] ]
Default
The system samples CPU usage every 1 minute.
Views
System view
Predefined user roles
network-admin
Parameters
interval-value: Specifies the CPU usage sampling interval. Valid values include 5Sec for 5 seconds, 1Min
for 1 minute, and 5Min for 5 minutes.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command sets
the CPU usage sampling interval for the active MPU. (On an MSR4000.)
cpu cpu-number: Specifies a CPU by its number. If you do not specify this option, the command sets the
CPU usage sampling interval for the default CPU.
Examples
# Set the CPU usage sampling interval to 5 seconds.
<Sysname> system-view
[Sysname] monitor cpu-usage interval 5Sec
Related commands
• display cpu-usage
display cpu-usage configuration
•
display cpu-usage history
•
monitor cpu-usage enable
•

password-recovery enable

Use password-recovery enable to enable password recovery capability.
Use undo password-recovery enable to disable password recovery capability.
Syntax
password-recovery enable
undo password-recovery enable
248