Ftp Server Dscp; Ftp Server Enable - HP MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule 0 permit source 1.1.1.1 0
[Sysname-acl-basic-2001] rule 1 deny source any
[Sysname-acl-basic-2001] quit
[Sysname] ftp server acl 2001

ftp server dscp

Use ftp server dscp to set the DSCP value for IPv4 to use for outgoing FTP packets on an FTP server.
Use undo ftp server dscp to restore the default.
Syntax
ftp server dscp dscp-value
undo ftp server dscp
Default
IPv4 uses the DSCP value 0 for outgoing FTP packets on an FTP server.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
The DSCP value is carried in the ToS field of an IP packet, and it indicates the transmission priority of the
packet.
Examples
# Set the DSCP value for IPv4 to use for outgoing FTP packets to 30 on an FTP server.
<Sysname> system-view
[Sysname] ftp server dscp 30

ftp server enable

Use ftp server enable to enable the FTP server.
Use undo ftp server enable to disable the FTP server.
Syntax
ftp server enable
undo ftp server enable
Default
The FTP server is disabled.
94