Display Cpu-Usage Configuration; Display Cpu-Usage History - HP MSR Series Command Reference Manual

Table 30 Command output
Field
Unit CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Slot x CPU y CPU usage

display cpu-usage configuration

Use display cpu-usage configuration to display CPU usage monitoring settings.
Syntax
MSR1000/MSR2000/MSR3000:
display cpu-usage configuration
MSR4000:
display cpu-usage configuration [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays the CPU usage monitoring settings for the active MPU. (On an MSR4000.)
cpu cpu-number: Specifies a CPU by its number. If you do not specify this option, the command displays
the CPU usage monitoring settings for the default CPU. (On an MSR4000.)
Examples
# Display the CPU usage monitoring settings.
<Sysname> display cpu-usage configuration
CPU usage monitor is enabled.
Current monitor interval is 60 seconds.
Related commands
monitor cpu-usage enable
•
monitor cpu-usage interval
•

display cpu-usage history

Use display cpu-usage history to display the historical CPU usage statistics in a coordinate system.
Syntax
MSR1000/MSR2000/MSR3000:
Description
CPU usage statistics. (On an MSR1000, MSR2000 or MSR3000.)
Average CPU usage during the last 5 seconds.
Average CPU usage during the last minute.
Average CPU usage during the last 5 minutes.
Usage statistics for CPU y of the card in slot x. (On an MSR4000.)
217