Configuration Replace File; Display Archive Configuration - HP MSR Series Command Reference Manual

configuration replace file

Use configuration replace file to perform configuration rollback.
Syntax
configuration replace file filename
Views
System view
Predefined user roles
network-admin
Parameters
filename: Specifies the name of the replacement configuration file for configuration rollback.
Usage guidelines
To replace the running configuration with the configuration in a configuration file without rebooting the
device, use the configuration rollback function. This function helps you revert to a previous configuration
state or adapt the running configuration to different network environments.
To ensure a successful rollback:
Make sure the replacement configuration file is created by using the configuration archive function
•
or the save command on the device.
• If the configuration file is not created on the device, make sure the command lines in the
configuration file are fully compatible with the device.
Make sure the replacement configuration file is not encrypted.
•
Examples
# Replace the running configuration with the configuration in the my_archive_1.cfg configuration file.
<Sysname> system-view
[Sysname] configuration replace file my_archive_1.cfg
Current configuration will be lost, save current configuration? [Y/N]:n
Now replacing the current configuration. Please wait...
Succeeded in replacing current configuration with the file my_archive_1.cfg.

display archive configuration

Use display archive configuration to display configuration archive information, including the archive
directory, archive prefix, archive interval, maximum number of archives, and saved archives.
Syntax
display archive configuration
Views
Any view
Predefined user roles
network-admin
network-operator
160