HP MSR Series Command Reference Manual page 58

Hardware
MSR4000
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the display line command. HP recommends that you use the display line
command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type
0 CON 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 6 Command output
Field
Modem
Int
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [CON]
Line type : [AUX]
Line type : [VTY]
2 lines used.
5 lines not used.
Tx/Rx Modem Auth
9600 -
Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a
hyphen (-) is displayed.
Physical port for the line. If there is no physical port for the line or the line is a console line, a
hyphen (-) is displayed.
0:U
1:X
2:UXXX X
(U)
(X)
Value range
aux: 0 to 2
console: 0 to 2
tty: 1 to 432
vty: 0 to 63
Int Location
N - 0/0
50