Roland Camm-1 CX-24/12 User Manual page 30

4 Basic Operation
- To stop cutting
Halt transmission of cutting instructions from the computer.
1
Click [Start]. Click [Settings], then click [Printers].
Double-click the printer icon.
2
For the CX-24:
[Roland CAMM-1 CX-24]
For the CX-12:
[Roland CAMM-1 CX-12].
3
At the [Printers] menu, click [Purge Print Jobs]. Make
sure the displayed data for the file being printed
disappears.
Turn the dial on the CX-24/12 to choose [END].
4
5
Pressing the [ENTER] key displays the message
shown at right, and cutting stops.
When Continuing with Cutting on the Same Piece of Material
Set the origin point at an uncut location on the
1
material (the location where you want to cut next).
For information on how to set the origin point, see
6 Setting the Origin
Send the cutting data from the program to the CX-24/
2
12.
Point."
PAUSE | <STOP>
SUSPENDED
"4-
30