Changing The Language Used For The Display - Roland GX-24 User Manual

2-3 Changing the Language Used for the Display

Change the language used for the display to match your preference.
Procedure
Operation
Panel
24 Chapter 2: Preparing the GX
LANG._ENGLISH
*_ENGLISH
SELECT SHEET
*ROLL
Cutting carriage
Hold down and press the power
button.
The power comes on.
Press to choose the language you
want to use for the display.
In this example, we'll choose [ENGLISH].
Press .
The cutting carriage moves to the right edge.
Be careful not to touch it.
Hold down the power button for one
second or longer.
The power is switched off.