Roland Camm-1 CX-24/12 User Manual page 47

LANG. |< ENGLIS>
UNIT | <Metric>
DEMO CUT
INITIALIZE EEROM
Yes
Stored in Memory
ENGLISH
Factry Default
ENGLIS,
Selection Choices
This selects the language for messages on the display. To display this menu,
Description
switch on the power while holding down the [MENU/PARAM] key.
Yes
Stored in Memory
Metric
Factry Default
Metric, Inch
Selection Choices
This selects the unit of measurement for numerical values shown on the
Description
display.
To display this menu, switch on the power while holding down the [MENU/
PARAM] key, then turn the dial clockwise.
This menu is for performing checks when the CX-24/12 is not operating
Description
correctly.
To display this menu, switch on the power while holding down the [ ] key.
[ENTER] returns the settings to their factory defaults.
Description
To display this menu, switch on the power while holding down the [ENTER]
key.
47
9 Display Menu Descriptions
, Deut., FRANÇ, , ITAL.,PORTUG,