Roland Camm-1 CX-24/12 User Manual page 20

4 Basic Operation
- CX-12
Position the material so that the left and right
edges are each above one of the grit rollers.
Align so that the left and right edges of the material
3
are parallel with the guide lines.
Using the stickers on the rails as a guide, adjust the
4
positioning of the left and right pinch rollers above
the grit rollers.
Make sure the end of the material has been pulled out
5
farther toward the front than the blade protector.
6 Raise the sheet loading lever.
This lowers the pinch rollers to hold the material in
place.
The white areas of the rails serve as a guide for positioning
the grit rollers.
Stickers
OK
Blade protector
Material's edge
20
Guide line marks
Not OK
Make sure the end of the material
does not catch on this groove.