Deleting A Stored Program; Recalling A Stored Program - Ricoh Savin en5100WD Operating Instructions Manual

6. Press [Yes].
7. Enter the program name.
You can enter up to 34 characters.
8. Press [OK].
The screen returns to the program screen, showing the program number followed by the program
name. The screen returns to the initial copy display after a short time.
• To check the contents of a program, recall the program.
• When it is overwritten, the previous program is deleted.

Deleting a Stored Program

Erases the contents of a program.
1. Press the [Program] key.
2. Press [Delete].
3. Press the program number you want to delete.
4. Press [Yes].
The program is deleted, and the display returns to the initial copy display.

Recalling a Stored Program

Recalls a stored program to make copies using the stored settings.
1. Press the [Program] key.
Registering Frequently Used Functions
95